[cisco-nas] vpdn & radius attribute connect-info

[Oliver Boehmer (oboehmer)]

> Right now we're getting nas-tx-speed & nas-rx-speed equal to 115000
> if we look at the aaa records on the LNS, which is the same as the
> default BW description of the physical interface (group-async) on the
> LAC. 
> 
> So we need to find a way to forward the correct modem speed from the
> LAC to the LNS, like some other attributes (port-type, interface,
> clid, dnis) are forwarded. 
> Is there a way we can "forward" the connect-info (or
> nas-connect-info?) attribute from a LAC (AS5300) to a LNS (7200)?
> Is there any difference if the LNS is actually a middle LNS/LAC in a
> vpdn multihop scenario? 

which IOS do you run on the LAC? Can you try an image with
CSCea74569/CSCdm62874 fixed (i.e. 12.3(10) or later)

Can you try to configure
  modem poll time 2
  modem poll retry 4
on the LAC to see if it makes a difference? "modem link-info poll time
6553" has also been reported to help..

	oli