[cisco-nas] ISDN and Async Dialup over same PRI

[Aaron Leonard]

Mat,

You're right - as of 12.2(5.7)T (CSCdv19928), "virtual-profile aaa" 
isn't needed any more, because a virtual profile will always be used if 
the attributes from AAA require one.

I've submitted a doc bug to get this cleaned up.

Aaron

---

> John,
>
> thanks for your reply. I came around this command as well and it seems 
> to be one of the great mysteries of Cisco. What I found out so far is 
> that the command existed for a limited time but is not visible in 
> newer IOS versions. I use a 12.3(19) mainline and the command isn't 
> there anymore. What I have been reading in another forum is that the 
> function that the command controls is carried out by default by the 
> IOS software now. So I think there's no need to issue the command.
>
> However to make things more complicated Cisco did remove the command 
> in IOS but keeps copying the command in all documentations and 
> examples. I found it in 12.2 and 12.4 documentation and probably not 
> just me is having problems reading documentation and not finding the 
> commands. Cisco definitely should clarify this.
>
> Regards,
> Mat
>
>
>
> 	*Jon Lewis <jlewis at lewis.org>*
>
> 10.06.2006 17:12
>
> 	       
>         To:        Aaron Leonard <Aaron at cisco.com>
>         cc:        Matthias Schaerer <matthias.schaerer at anyweb.ch>, 
> cisco-nas at puck.nether.net
>         Subject:        Re: [cisco-nas] ISDN and Async Dialup over 
> same PRI
>
>
>
>
> On Fri, 9 Jun 2006, Aaron Leonard wrote:
>
> > Matthias,
> >
> > Looks like Serial1/0:15 is missing the command "ppp authorization
> > DialInAndOut".
>
> Might he also need virtual-profile aaa ?
>
> ----------------------------------------------------------------------
> Jon Lewis                   |  I route
> Senior Network Engineer     |  therefore you are
> Atlantic Net                |
> _________ http://www.lewis.org/~jlewis/pgp for PGP public key_________
>