[cisco-nas] redial working for ppp auth failures too

Mounir Mohamed mounir.mohamed at gmail.com
Thu Mar 30 09:23:57 EST 2006


The below URL may solve your problem

http://www.cisco.com/en/US/products/sw/iosswrel/ps5413/products_feature_guide09186a008044206d.html

Best Regards,
Mounir Mohamed

On 3/30/06, Tassos Chatzithomaoglou <achatz at forthnet.gr> wrote:
>
> I'm trying to enable an interval between failed auth attempts, which has
> to be
> configured on the client modem.
>
> I tried the "dialer redial" command:
>
> int dialer 1
>   dialer redial interval 60 attempts 3 re-enable 300
>
> but the problem is that this redial interval isn't working for ppp auth
> failures, because it doesn't count them.
>
> Di2 - dialer type = DIALER PROFILE
> Idle timer (300 secs), Fast idle timer (30 secs)
> Wait for carrier (30 secs), Re-enable (15 secs)
> Dialer state is idle
> Number of active calls = 0
>
> Dial String      Successes   Failures    Last DNIS   Last status
> xxxxxxxxxx              96          0    00:00:10       successful
> Default
>
>
> So is there a way to delay the redial after a ppp auth failure?
>
>
> --
> Tassos
>
> _______________________________________________
> cisco-nas mailing list
> cisco-nas at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nas
>



--
Best Reagrds,
Mounir Mohamed
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-nas/attachments/20060330/9d1f5a00/attachment.html 


More information about the cisco-nas mailing list