[cisco-nas] Cisco3640 tftpdnld problem

[Radek Jirout]

1/ Use set command to set speed of consoleport to 115200
2/ Use Xmodem download (minicom etc.)

/radar


On Wed, 10 May 2006, Souphonh Phounsavath wrote:

> Dear All,
>
> I have problem with Cisco 3640' flash. The router cannot load the image file from the flash. Now I have new flash, but it does not have any IOS on it. I would like to copy the IOS from my TFTP server to the new flash. From the document, this can be done by using "tftpdnld" command on ROMMON. However, there is no that command on the rommon prompt. It has only the following command:
>
>   boot                boot up an external process
>   break               set/show/clear the breakpoint
>   confreg             configuration register utility
>   cont                continue executing a downloaded image
>   context             display the context of a loaded image
>   cookie              display contents of cookie PROM in hex
>   dev                 list the device table
>   dir                 list files in file system
>   dis                 disassemble instruction stream
>   dnld                serial download a program module
>   frame               print out a selected stack frame
>   help                monitor builtin command help
>   history             monitor command history
>   meminfo             main memory information
>   repeat              repeat a monitor command
>   reset               system reset
>   set                 display the monitor variables
>   stack               produce a stack trace
>   sync                write monitor environment to NVRAM
>   sysret              print out info from last system return
>   unalias             unset an alias
>   unset               unset a monitor variable
>   xmodem              x/ymodem image download
>   rommon 3 >
>
> Please suggest how can I copy the IOS into the new flash.
>
> Regards,
> Souphonh