[cisco-nas] VoIP leg to VoIP lge dial-peer

[David Lin]

Hi all,
I am working on one AS5350 to covert the codec and voice protocol, now I am 
using 2 T1 interface to do it. The call comes to the gateway and goes to the 
T1, then comes back to the gateway from another T1 port. I change the codec 
on the outgoing voip call leg.
Is it possible to send the VoIP call to AS5350 then route it to VoIP 
directly? It means both incoming call leg and outgoing call leg is VoIP in 
the dial-peer so that I don't need to do the back to back/loop back 
connection and save the T1/E1 interface.

David

_________________________________________________________________
A place for moms to take a break! 
http://www.reallivemoms.com?ocid=TXT_TAGHM&loc=us