[cisco-nas] VoIP leg to VoIP lge dial-peer

[Darryl Sladden (dsladden)]

David,

Yes this is possible.
This is called Cisco Unified Border Element (previously IP-IP Gateway
functionality).

This is supported on the AS5350XM and AS5400XM with IOS image 
12.4M and later.

Older chassis do not support this.

Regards,
Darryl Sladden
Product Manager
Cisco Systems - Access Technology Group
dsladden at cisco.com
Phone: 408-525-8970 
Cell: 408-505-2510

 

 

> -----Original Message-----
> From: cisco-nas-bounces at puck.nether.net 
> [mailto:cisco-nas-bounces at puck.nether.net] On Behalf Of David Lin
> Sent: Thursday, September 27, 2007 8:43 AM
> To: cisco-nas at puck.nether.net
> Subject: [cisco-nas] VoIP leg to VoIP lge dial-peer
> 
> Hi all,
> I am working on one AS5350 to covert the codec and voice 
> protocol, now I am using 2 T1 interface to do it. The call 
> comes to the gateway and goes to the T1, then comes back to 
> the gateway from another T1 port. I change the codec on the 
> outgoing voip call leg.
> Is it possible to send the VoIP call to AS5350 then route it 
> to VoIP directly? It means both incoming call leg and 
> outgoing call leg is VoIP in the dial-peer so that I don't 
> need to do the back to back/loop back connection and save the 
> T1/E1 interface.
> 
> David
> 
> _________________________________________________________________
> A place for moms to take a break! 
> http://www.reallivemoms.com?ocid=TXT_TAGHM&loc=us
> 
> _______________________________________________
> cisco-nas mailing list
> cisco-nas at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nas
>