[cisco-nas] E1 R2 signal

[David Lin]

But the provider can only provide Compelled signaling. 
It looks like the far end Switch waits for a timer.
Is there any way can save the delay?
Thanks.


From: hoathai at ngt.vnTo: david.lin at msn.com; cisco-nas at puck.nether.netSubject: RE: [cisco-nas] E1 R2 signalDate: Tue, 29 Jan 2008 13:50:47 +0700






Hi David
 
You can configure the E1 Controller to use Non-Compelled, it will save a lot of time.
 
Brgds
 
Thai Duy Hoa
 


From: cisco-nas-bounces at puck.nether.net [mailto:cisco-nas-bounces at puck.nether.net] On Behalf Of David LinSent: Tuesday, January 29, 2008 11:24 AMTo: cisco-nasSubject: [cisco-nas] E1 R2 signal
 
Hi all,I configured the E1 R2 on AS5350 but when I made call to the Switch via the E1, it got more than 10 seconds silence before the ring back tone came. I enabled signal-end-to-end but it didn't help. Could any one tell me how to reduce the delay? Any advice will be appreciated. Thanks, David



_________________________________________________________________

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-nas/attachments/20080129/486e1f7b/attachment.html