[cisco-nas] E1 R2 signal

[Hoa Thai Duy (NGT)]

Hi David

 

You can configure the E1 Controller to use Non-Compelled, it will save a lot
of time.

 

Brgds

 

Thai Duy Hoa

 

From: cisco-nas-bounces at puck.nether.net
[mailto:cisco-nas-bounces at puck.nether.net] On Behalf Of David Lin
Sent: Tuesday, January 29, 2008 11:24 AM
To: cisco-nas
Subject: [cisco-nas] E1 R2 signal

 

Hi all,
I configured the E1 R2 on AS5350 but when I made call to the Switch via the
E1, it got more than 10 seconds silence before the ring back tone came. I
enabled signal-end-to-end but it didn't help. Could any one tell me how to
reduce the delay? Any advice will be appreciated.
 
Thanks,
 
David

  _____  

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-nas/attachments/20080129/64e05de2/attachment.html