[cisco-nas] Windows 10 with AS5400

[Joseph Mays]

Thanks for the response! Trying all the client-side suggestions. WRT this, though...
  a.. on the infrastructure side, if a router in the affected network path is a Cisco IOS router, then turn on TCP MSS Adjust (set it to 1250 or 1360 or so.) 
All the routers in the network path on our system are network routers. Are you suggesting I turn this on for all of them, or just on the AS5400 that answers the dialup connection?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-nas/attachments/20170608/c555808e/attachment.html>