[cisco-nas] Windows 10 with AS5400

[Joseph Mays]

I meant to say they are all cisco routers.

From: Joseph Mays 
Sent: Thursday, June 08, 2017 3:46 PM
To: cisco-nas at puck.nether.net 
Subject: Re: [cisco-nas] Windows 10 with AS5400

Thanks for the response! Trying all the client-side suggestions. WRT this, though...
  a.. on the infrastructure side, if a router in the affected network path is a Cisco IOS router, then turn on TCP MSS Adjust (set it to 1250 or 1360 or so.) 
All the routers in the network path on our system are network routers. Are you suggesting I turn this on for all of them, or just on the AS5400 that answers the dialup connection?


--------------------------------------------------------------------------------
_______________________________________________
cisco-nas mailing list
cisco-nas at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nas
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-nas/attachments/20170608/f33d3e3e/attachment.html>