[nsp] configure command "do"

[Marlow, Travis]

there is such a command and it allows you to do any exec level commands
while in global config mode.  Very handy and a huge timesaver.

-----Original Message-----
From: Ryan O'Connell [mailto:ryan@complicity.co.uk]
Sent: Friday, August 02, 2002 3:10 AM
To: Stefan Reelsen; cisco-nsp@puck.nether.net
Subject: Re: [nsp] configure command "do"


On Mon, 29 Jul 2002 16:23:04 +0200 Stefan Reelsen <stefan@reelsen.net>
wrote:
> somebody told me it would be possible to show the running-config out
> of the configuration mode with the command "do show run". With IOS
> 12.2.10b the system asks for <0-999999>.<0-999999>  Version number
> when enterering "do ?".
> Does anybody know what this means?

I don't believe there is any such command. "do" is probably shorthand for
some other command - see what typing "do?" (Without the space) gives.

--
         Ryan O'Connell - CCIE #8174
<ryan@complicity.co.uk> - http://www.complicity.co.uk

I'm not losing my mind, no I'm not changing my lines,
I'm just learning new things with the passage of time

_______________________________________________
cisco-nsp mailing list  real_name)s@puck.nether.net
http://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/