[nsp] Serial Interface end-to-end with Channelized E1 card

[Ezequiel Carson]

conf t
cont e1 1/1
channel group 0 time slot 1-8

int s1/1:0
ip add x.x.x.x 255.255.255.252
-------------

conf t
cont e1 2/0
channel group 0 timeslot 1-8

int s2/0:0
ip add x.x.x.x 255.255.255.252



On Tue, 2002-08-06 at 14:06, Tay Chee Yong wrote:
> Hi,
> 
> May I know if anyone had ever configure serial interfaces on a point-to-point
> connection, with both end using the Channelized E1 card?
> 
> |--------------------------------              |-----------------------------|
> |  7206 with                    |              |  7206 with 2 port           |
> | 2 port channelized e1         |    PSTN      | channelized e1              |
> |  E1 1/1                       |--------------| E1 2/0                      |
> |channel group 0 time slot 1-8  |              |channel group 0 timeslot 1-8 |
> ---------------------------------              |-----------------------------|
> 
> If so, would appreaciate any advise on how to configure both ends who are using
> lease line. Thanks.
> 
> Regards,
> Cheeyong
> 
> _______________________________________________
> cisco-nsp mailing list  real_name)s@puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>