[nsp] Serial Interface end-to-end with Channelized E1 card
Ezequiel Carson
ezequiel@ifxnw.com.ar
07 Aug 2002 09:40:43 -0300
Tay,
What is state of the controller e1? Do you have any alarm like
Remote Alarm or No signal?
Ezequiel
On Wed, 2002-08-07 at 05:18, Tay Chee Yong wrote:
> Thanks. I actually tried to configured the following configuration on my router
> and my customer's router, but the line doesn't seems to come up... Currently, I
> am still checking with our Telco provider.
>
> Was wondering if there was something which I had missed out in the
> configuration.
>
> Thanks for your assistance.
>
> Regards,
> Cheeyong
>
> On 6 Aug 2002, Ezequiel Carson wrote:
>
> > conf t
> > cont e1 1/1
> > channel group 0 time slot 1-8
> >
> > int s1/1:0
> > ip add x.x.x.x 255.255.255.252
> > -------------
> >
> > conf t
> > cont e1 2/0
> > channel group 0 timeslot 1-8
> >
> > int s2/0:0
> > ip add x.x.x.x 255.255.255.252
> >
> >
> >
> > On Tue, 2002-08-06 at 14:06, Tay Chee Yong wrote:
> > > Hi,
> > >
> > > May I know if anyone had ever configure serial interfaces on a point-to-point
> > > connection, with both end using the Channelized E1 card?
> > >
> > > |-------------------------------- |-----------------------------|
> > > | 7206 with | | 7206 with 2 port |
> > > | 2 port channelized e1 | PSTN | channelized e1 |
> > > | E1 1/1 |--------------| E1 2/0 |
> > > |channel group 0 time slot 1-8 | |channel group 0 timeslot 1-8 |
> > > --------------------------------- |-----------------------------|
> > >
> > > If so, would appreaciate any advise on how to configure both ends who are using
> > > lease line. Thanks.
> > >
> > > Regards,
> > > Cheeyong
> > >
> > > _______________________________________________
> > > cisco-nsp mailing list real_name)s@puck.nether.net
> > > http://puck.nether.net/mailman/listinfo/cisco-nsp
> > > archive at http://puck.nether.net/pipermail/cisco-nsp/
> > >
> >
> >
>
>