[nsp] Serial Interface end-to-end with Channelized E1 card

SaJaRi sajari@singnet.com.sg
Thu, 8 Aug 2002 09:27:36 +0800 (SST)


Hi there!

Just make sure u have the same encapsulation on both Serial interface be
it HDLC or PPP.

Cheers!

*************************                            
Sajari Bin Sarkan       *   
SingNet Network Support *
*************************

-----BEGIN PGP PUBLIC KEY BLOCK-----
Version: 2.6.i

mQBtAjc9fI4AAAEDAMx6kkJcuhMq9TJEecb3JaiHe6fHRMlaVX/5Om7eCi2xdONO
HfVeuTUryabhb7J2mRgKo7z4YWoNxOdNdDtRVaMfD7H18mdV0KYvlR/+9NAgKGxi
UEaOYPJsKNHWCAKV1QAFEbQeU2FKYVJpIDxzYWphcmlAc2luZ25ldC5jb20uc2c+
=gG2n
-----END PGP PUBLIC KEY BLOCK-----

On Wed, 7 Aug 2002, Tay Chee Yong wrote:

> Thanks. I actually tried to configured the following configuration on my router
> and my customer's router, but the line doesn't seems to come up... Currently, I
> am still checking with our Telco provider.
> 
> Was wondering if there was something which I had missed out in the
> configuration.
> 
> Thanks for your assistance.
> 
> Regards,
> Cheeyong
> 
> On 6 Aug 2002, Ezequiel Carson wrote:
> 
> > conf t
> > cont e1 1/1
> > channel group 0 time slot 1-8
> >
> > int s1/1:0
> > ip add x.x.x.x 255.255.255.252
> > -------------
> >
> > conf t
> > cont e1 2/0
> > channel group 0 timeslot 1-8
> >
> > int s2/0:0
> > ip add x.x.x.x 255.255.255.252
> >
> >
> >
> > On Tue, 2002-08-06 at 14:06, Tay Chee Yong wrote:
> > > Hi,
> > >
> > > May I know if anyone had ever configure serial interfaces on a point-to-point
> > > connection, with both end using the Channelized E1 card?
> > >
> > > |--------------------------------              |-----------------------------|
> > > |  7206 with                    |              |  7206 with 2 port           |
> > > | 2 port channelized e1         |    PSTN      | channelized e1              |
> > > |  E1 1/1                       |--------------| E1 2/0                      |
> > > |channel group 0 time slot 1-8  |              |channel group 0 timeslot 1-8 |
> > > ---------------------------------              |-----------------------------|
> > >
> > > If so, would appreaciate any advise on how to configure both ends who are using
> > > lease line. Thanks.
> > >
> > > Regards,
> > > Cheeyong
> > >
> > > _______________________________________________
> > > cisco-nsp mailing list  real_name)s@puck.nether.net
> > > http://puck.nether.net/mailman/listinfo/cisco-nsp
> > > archive at http://puck.nether.net/pipermail/cisco-nsp/
> > >
> >
> >
> 
> _______________________________________________
> cisco-nsp mailing list  real_name)s@puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>