[nsp] Removing frame relay subif

[Lee Waskevich]

Only way ive ever found is a reboot ;)

lee

-----Original Message-----
From: Mark Drayton [mailto:mark.drayton@izrsolutions.com] 
Sent: Thursday, August 08, 2002 12:13 PM
To: cisco-nsp@puck.nether.net
Subject: [nsp] Removing frame relay subif


Hi

I have a 7204VXR (12.2(5d)) with a PA-E3 and a frame relay subif that won't
go away:

core-01.th#sh ip int br | inc 191
Serial2/0.191              unassigned      YES manual deleted     down

core-01.th#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
core-01.th(config)#no int s2/0.191 % Not all config may be removed and may
reappear after reactivating the sub-interface core-01.th(config)#^Z
core-01.th#sh ip int br | inc 191
Serial2/0.191              unassigned      YES manual deleted     down

How can I remove it? It's not affecting the router at all, it's just bugging
me :I

Cheers,

-- 

Mark Drayton
izR Solutions Ltd
Tel: +44 08707 447799 _______________________________________________
cisco-nsp mailing list  real_name)s@puck.nether.net
http://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/