[nsp] Removing frame relay subif

[Clinton Work]

I have seen this a lot on various versions of IOS 11.3 - 12.1. The
deleted sub-interface won't go away until the router is rebooted or
the port adapter is removed. It doesn't cause any problems.

On Thu, Aug 08, 2002 at 05:12:52PM +0100, Mark Drayton wrote:
> Hi
> 
> I have a 7204VXR (12.2(5d)) with a PA-E3 and a frame relay subif that
> won't go away:
> 
> core-01.th#sh ip int br | inc 191
> Serial2/0.191              unassigned      YES manual deleted     down
> 
> core-01.th#conf t
> Enter configuration commands, one per line.  End with CNTL/Z.
> core-01.th(config)#no int s2/0.191
> % Not all config may be removed and may reappear after reactivating the sub-interface
> core-01.th(config)#^Z
> core-01.th#sh ip int br | inc 191
> Serial2/0.191              unassigned      YES manual deleted     down
> 
> How can I remove it? It's not affecting the router at all, it's just
> bugging me :I
> 
> Cheers,
> 
> -- 
> 
> Mark Drayton
> izR Solutions Ltd
> Tel: +44 08707 447799
> _______________________________________________
> cisco-nsp mailing list  real_name)s@puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/

-- 
=========================================================================
Clinton Work                                        clinton@scripty.com
Calgary, Alberta