[nsp] flash memory for AS5300's

[Jared Mauch]

	i've found that most of the Cisco flash is
interoperable.  you may need to xmodem new software
in and reformat the flash device.

	- jared

On Fri, Aug 09, 2002 at 01:23:53PM -0600, Cisco Geek Rotation wrote:
> I've been backed into a corner.  I need flash memory for a 5396 instantly 
> but time is up to order any.
> 
> I asked a couple people and they say that they believe the Cisco 2600's use 
> the same flash.  Anyone know if this is true?  Because I have a couple of 
> 16Meg flash modules for a 2600 that I can cannibalize to get going. I 
> already know that pairs are required for the flash SIMMs, so I'd be putting 
> in 32Megs which is a bit of overkill I realize :)
> 
> Thanks,
> Chris
> 
> 
> _______________________________________________
> cisco-nsp mailing list  real_name)s@puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/

-- 
Jared Mauch  | pgp key available via finger from jared@puck.nether.net
clue++;      | http://puck.nether.net/~jared/  My statements are only mine.