[nsp] enable commands as non-enable user?

[Barry Bruins]

Ughh.  I'm embarrassed.  You're right.  It may require a TACACS+ server
in the mix.

Barry

At 01:06 PM 8/12/2002 -0500, Josh Duffek wrote:
>just fyi...im 99% sure you cant do this for "sh run"...but i never tried for
>"sh config".
>
>joshd
>
>----- Original Message -----
>From: "Barry Bruins" <bbruins@cisco.com>
>To: "Bruce Campbell" <bruce.campbell@ripe.net>; <cisco-nsp@puck.nether.net>
>Sent: Monday, August 12, 2002 12:24 PM
>Subject: Re: [nsp] enable commands as non-enable user?
>
>
>> Use the privilege command to set the show running-config to another level.
>>
>> Barry
>>
>> At 06:29 PM 8/12/2002 +0200, Bruce Campbell wrote:
>>
>> >Greetings,
>> >
>> >I'm wanting to allow a dedicated non-enabled user to be able to 'show
>> >conf' (run through all the routers and save the conf nightly).  Is this
>> >possible via AAA (tacacs+)?  ( the AAA overview on cco isn't that clear
>on
>> >whether this is possible or not)
>> >
>> >--==--
>> >Bruce.
>> >
>> >_______________________________________________
>> >cisco-nsp mailing list  real_name)s@puck.nether.net
>> >http://puck.nether.net/mailman/listinfo/cisco-nsp
>> >archive at http://puck.nether.net/pipermail/cisco-nsp/
>>
>
>_______________________________________________
>cisco-nsp mailing list  real_name)s@puck.nether.net
>http://puck.nether.net/mailman/listinfo/cisco-nsp
>archive at http://puck.nether.net/pipermail/cisco-nsp/