[nsp] enabling port monitoring

[Ryan O'Connell]

On 22 Aug 2002 07:05:19 -0000 arun yadav yadav <aruncisco@rediffmail.com> wrote:
>   I m having sniffer pro 2.8 software loaded on a machine which is 
> supposed to be connected to a MONITORING port of the switch.
> 
> Question :
>   How do i enable port monitoring on the cisco catalyst 6509 
> switch ?
> 
> On one port it is already enabled & it shows MONITOR as port 
> status as shown below but i want to know how it can be done on 
> another port.

See:

http://www.cisco.com/warp/public/473/41.html#456

You probably want something like:

set span 9/1 9/2

Which will copy all traffic from port 9/1 to 9/2.

--
      Ryan O'Connell
Mail: ryan@complicity.co.uk
  CV: http://www.complicity.co.uk/ryancv.pdf
      CCIE #8174