[nsp] wiered router problem

[prashant desai]

my router is connected to our office other office from 
where its going to the internet , btw when the problem 
occured there isnt any problem at that office where the 
router is connected nor there were any problems with the 
internet connected at that office 

regards
Prashant Desai

----- Original Message -----
From: "Josh Duffek" <jduffek@cisco.com>
Date: Friday, August 23, 2002 10:34 pm
Subject: Re: [nsp] wiered router problem

> not enough information to give any sort of clueful answer.
> 
> is your router connected to the internet?
> 
> all,
> joshd.
> 
> ----- Original Message ----- 
> From: "prashant desai" <prashant.desai@iqara.net>
> To: <cisco-nsp@puck.nether.net>
> Sent: Friday, August 23, 2002 2:31 AM
> Subject: [nsp] wiered router problem
> 
> 
> > Hello All
> > 
> >      i am using cisco 2500 router , today i faced 
> very 
> > wiered problem and wants to know if there is anyone 
> here 
> > who has also faced the same sort of problem .
> > 
> >    router was working fine till today , but today 
> suddenly 
> > what happend when i pingd the ethernet port of 
> router it 
> > started giving me timeouts , so i called up my 
> colouge who 
> > is sitting at the other office where the serial link 
> from 
> > my router gets terminated , he had then telneted to 
> the 
> > outer's serial port and he was able to telnet then 
> from 
> > that termial only he tried to ping the router's 
> ethernet 
> > port but it did't worked , so what i mean is when 
> the user 
> > was connected to the router's serial port he was not 
> able 
> > to ping the router's ethernet port. i tried 
> rebooting the 
> > router for around 2-3 times but it didt worked out , 
> during 
> > all these time the link for the router's ethernet 
> port on 
> > my switch was showing the "up" status. i tried all 
> the 
> > things changing cables etc but then also it didt 
> worked out 
> > for around 2 hours, after two hours it again started 
> > working with out any change in either the config or 
> the 
> > cable , 
> > 
> >   has anyone faced this sort of problem ever , i 
> still have 
> > no clues k why this happened , would appritiate if 
> some one 
> > can clarify the possible reasons .
> > 
> >    ya one more thing i have AUI port in the router , 
> in 
> > which i have inserted my AUI to ethernet converter 
> .and its 
> > also not faulty i mean its still working.
> > 
> > Thanx & Regards
> > Prashant Desai   
> > 
> > 
> > Go To http://www.iqara.net
> > 
> > _______________________________________________
> > cisco-nsp mailing list  real_name)s@puck.nether.net
> > http://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
> > 
> 
> _______________________________________________
> cisco-nsp mailing list  real_name)s@puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
> 


Go To http://www.iqara.net