[nsp] WAI-T1-4RJ48 vs. WAI-T1C-4RJ48

[Przemyslaw Karwasiecki]

AFAIK, WAI-T1C does only CES. 

When LS1010 recognizes this PAM, it creates CBR interfaces only.
I don't know the way to change it -- my guess is, it is hardware
functionality, and is not configurable....

Przemek

On Fri, 2002-08-23 at 11:07, Brian wrote:
> 
> I am needing a WAI-T1-4RJ48 for an application, and the application does 
> not need Circuit Emulation.  I do realize that the WAI-T1C-4RJ48 supporst 
> CES however.  The thing is, I have a WAI-T1C, I do not have a WAI-T1.  Can 
> I just use the WAI-T1C in place of a WAI-T1 for non-CES applications?  In 
> other words is the WAI-T1C everything a WAI-T1 is only has the addition of 
> CES, or is it a different beast and can only be used in CES 
> applcations/scenerios?
> 
> Appreciate any feedback as I do not have much experience with the WAI-T1 
> pams.
> 
> Brian
> 
> 
> -----------------------------------------------
> Brian Feeny, CCIE #8036	   e: signal@shreve.net
> Network Engineer	   p: 318.222.2638x109	
> ShreveNet Inc.		   f: 318.221.6612 
> 	     	      
> 
> _______________________________________________
> cisco-nsp mailing list  real_name)s@puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/