[nsp] graph mc-t3 channel error stats

[Mark Kent]

I just went through a looong 5 days tracking down
a problem with 27 channels on two different DS3 hubs,
plugged into pa-mc-t3 on two 7206vxr.  (finally got wcom to
admit there was a "BZ ring" problem between the SanJose node
and where I am)

If I had the errors graphed by mrtg then things would have been easier
for me (and I could have pointed the WCOM techies at the graphs).  

I'ld appreciate if someone would send me the mrtg magic to grab the
individual T1 errors, like we see on the "sh contr t3 5/0 tab" output:

  T1 28 is up
  timeslots: 1-24
  FDL per AT&T 54016 spec.
  No alarms detected.
  Framing is ESF, Clock Source is Internal, Rx throttles 29
  INTERVAL      LCV   PCV   CSS  SELS   LES    DM    ES   BES   SES   UAS    SS
  12:35-12:38     0     0     0     0     0     0     0     0     0     0     0
  12:20-12:35     0     0     0     0     0     0     0     0     0     0     0
  12:05-12:20     0     0     0     0     0     0     0     0     0     0     0
  11:50-12:05     0     0     0     0     0     0     0     0     0     0     0
  11:35-11:50     0     0     0     0     0     0     0     0     0     0     0
  11:20-11:35     0     2     0     1     0     0     1     0     1     0     0
  11:05-11:20     0     0     0     0     0     0     0     0     0     0     0
  10:50-11:05     0    43     0     2     0     0     2     0     2     0     0
  10:35-10:50     0    12     0     1     0     0     1     0     1     0     0
  10:20-10:35     0    67     0     4     0     0     5     0     4     0     0

Before someone answers "you can write this yourself..." let me say,
Yes, I can.  But after five days with 27 problem circuits, I could
use a handout :-)

Thanks,
-mark