[nsp] vip4/80 help

[Jeff Strahl]

>From looking at your 'sho diag 12', it appears that your VIP is wedged.
Thus it will not detect any cards.

my $.02

-Jeff

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Jeff C. Strahl
Sr. IP Network Engineer
Grande Communications Networks, Inc.
Phone: 1.512.878.4000
jeff.strahl@grandecom.com
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


-----Original Message-----
From: cisco-nsp-admin@puck.nether.net
[mailto:cisco-nsp-admin@puck.nether.net]On Behalf Of Joshua Smith
Sent: Monday, December 02, 2002 4:51 PM
To: cisco-nsp@puck.nether.net
Subject: [nsp] vip4/80 help


i just installed a vip4/80 in a 7513 and am not having any luck bringing
the card up - i reloaded the router manually when the bus did not reset
itself (i don't know that this was the way to do it) - does anyone have 
any thoughts on this:

thanks

cr2-brd#sho diag 12
Slot 12:
        Physical slot 12, ~physical slot 0x3, logical slot 12, CBus 0
        Internal Instruction Error, Microcode Status 0x8
        Master Enable, LED, WCS DBUS Cmd Enable, WCS Loading, WCS Loaded
        Board is disabled wedged
        Pending I/O Status: Console I/O, Debug I/O, Msg I/O
        EEPROM format version 1
        VIP4-80 RM7000 controller, HW rev 2.02, board revision B0
        Serial number: 18585436  Part number: 73-3143-02
        Test history: 0x00        RMA number: 00-00-00
        Flags: cisco 7000 board; 7500 compatible

        EEPROM contents (hex):
          0x20: 01 22 02 02 01 1B 97 5C 49 0C 47 02 00 00 00 00
          0x30: 58 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

        Slot database information:
        Flags: 0x291    Insertion time: 0x3F8C (00:17:06 ago)

        VIP Controller Memory Size: Unknown

cr2-brd#sho ver
Cisco Internetwork Operating System Software
IOS (tm) RSP Software (RSP-IK9O3SV-M), Version 12.2(11)T1,  RELEASE SOFTWARE
(fc2)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Mon 30-Sep-02 14:20 by ccai
Image text-base: 0x60010948, data-base: 0x61B64000

ROM: System Bootstrap, Version 12.0(10r)S1, RELEASE SOFTWARE (fc1)

cr2-brd uptime is 17 minutes
System returned to ROM by reload at 17:30:06 EST Mon Dec 2 2002
System restarted at 17:32:00 EST Mon Dec 2 2002
System image file is "slot0:rsp-ik9o3sv-mz.122-11.T1.bin"

cisco RSP8 (R7000) processor with 262144K/8216K bytes of memory.
R7000 CPU at 250Mhz, Implementation 39, Rev 2.1, 256KB L2, 2048KB L3 Cache
Last reset from power-on
G.703/E1 software, Version 1.0.
G.703/JT2 software, Version 1.0.
X.25 software, Version 3.0.0.
Bridging software.
Chassis Interface.
2 VIP4-80 RM7000 controllers (1 FastEthernet)(4 Ethernet)(1 Serial)(1 POS).
4 Ethernet/IEEE 802.3 interface(s)
1 FastEthernet/IEEE 802.3 interface(s)
1 Serial network interface(s)
1 Packet over SONET network interface(s)
2043K bytes of non-volatile configuration memory.

32768K bytes of Flash PCMCIA card at slot 0 (Sector size 128K).
20480K bytes of Flash PCMCIA card at slot 1 (Sector size 128K).
16384K bytes of Flash internal SIMM (Sector size 256K).

Slave in slot 7 is running Cisco Internetwork Operating System Software
IOS (tm) RSP Software (RSP-DW-M), Version 12.2(11)T1,  RELEASE SOFTWARE
(fc2)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Sat 28-Sep-02 00:00 by ccai
Slave: Loaded from system
Slave: cisco RSP8 (R7000) processor with 262144K bytes of memory.

Configuration register is 0x2102

cr2-brd#


"Walk with me through the Universe,
 And along the way see how all of us are Connected.
 Feast the eyes of your Soul,
 On the Love that abounds.
 In all places at once, seemingly endless,
 Like your own existence."
     - Stephen Hawking -


_______________________________________________
cisco-nsp mailing list  cisco-nsp@puck.nether.net
http://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/