[nsp] --More--

[Philip Smith]

Hi Hank,

Try IOS Essentials 2.9 under the CLI string search section - Page 35, 
second para down. ;-) Granted I only wrote one line, but it is there.

philip
--

At 08:05 09/12/2002 +0200, Hank Nussbacher wrote:
>I happened to hit on this by chance and have not been able to find it 
>documented anyplace within Cisco so I'll mention it here.
>
>When scrolling thru some output and you get the "--More--" prompt, 
>normally one hits either ENTER or SPACE.  By mistake I hit "+" and then 
>some text and the result is that the remaining text is filtered to display 
>only lines with the characters listed.  "-" also works after a few tests 
>(displays lines without the stated text-string).
>
>I also looked at the various Cisco undocumented IOS command sites and 
>couldn't find this either.
>
>Enjoy,
>Hank
>
>_______________________________________________
>cisco-nsp mailing list  cisco-nsp@puck.nether.net
>http://puck.nether.net/mailman/listinfo/cisco-nsp
>archive at http://puck.nether.net/pipermail/cisco-nsp/