[nsp] How to check memory on FlexWAN

[Ian Cox]

At 11:28 PM 12/13/2002 +0100, sthaug@nethelp.no wrote:
>We have some 6509s/7609s running native IOS, with FlexWANs. Does
>anybody know how we can check the amount of free memory on the
>FlexWAN (corresponding to "if-console" followed by "show mem" on
>a 7500)? The "remote command module ..." which works with the
>Supervisor (and also for instance with a 6816) does not work with
>the FlexWAN.

ipc-con <slot> <bay 0 or 1>

FlexWAN has a different command because it has two CPUs, and each one runs 
independently.


Ian



>Steinar Haug, Nethelp consulting, sthaug@nethelp.no
>_______________________________________________
>cisco-nsp mailing list  cisco-nsp@puck.nether.net
>http://puck.nether.net/mailman/listinfo/cisco-nsp
>archive at http://puck.nether.net/pipermail/cisco-nsp/