[nsp] 12.0(22)S experiences on 7200/7500?

Andrew Partan post-cisco-nsp@partan.com
Thu, 25 Jul 2002 13:08:29 -0400

On Thu, Jul 25, 2002 at 08:52:54AM -0700, David Sinn wrote:
> Here is the URL for the break down of supported and revision
> requirements for PA's in VXR's:
> http://www.cisco.com/warp/customer/770/fn3028.shtml
> If the configuration was working under a earlier version of IOS, the
> newer IOS shouldn't break thing because of the HW rev.  (Unless Cisco
> broke the HW rev. checking and is letting these cards enable during
> boot!)

My PAs are at the supported rev level and were working with
c7200-k4p-mz.120-21.S1 and c7200-k4p-mz.120-21.4.S (& lots of
earlier versions).  They run c7200-boot-mz.120-21.4.S2.  They hang
with c7200-k4p-mz.120-21.4.S2 or c7200-k4p-mz.120-21.4.S3.