[nsp] 3640 hardware/software problem

[Mark Drayton]

rain (rain@support.temark.com) wrote:
> I'm having problems getting  NM-2FE2W to come up. I painfully used
> rommon to load up IOS 12.2T from console still no dice.
> http://www.cisco.com/en/US/products/hw/modules/ps2797/products_tech_note09186a00800b1155.shtml
> Someone told me to try a revision ending in E which I tried 12.2(6e)
> that didn't work either. 
> 
> Anyone have any ideas? 

We have one working in a 3640 with 12.7b (IP):

Slot 1:
        NM-2FE2W Port adapter, 2 ports
        Port adapter is analyzed
        Port adapter insertion time unknown
        EEPROM contents at hardware discovery:
        Hardware Revision        : 1.0
        Top Assy. Part Number    : 800-04797-01
        Board Revision           : F0
        Deviation Number         : 0-8707
        Fab Version              : 05
        PCB Serial Number        : JAD05350SA0
        RMA Test History         : 00
        RMA Number               : 0-0-0-0
        RMA History              : 00
        EEPROM format version 4
        EEPROM contents (hex):
          0x00: 04 FF 40 00 D8 41 01 00 C0 46 03 20 00 12 BD 01
          0x10: 42 46 30 80 00 00 22 03 02 05 C1 8B 4A 41 44 30
          0x20: 35 33 35 30 53 41 30 03 00 81 00 00 00 00 04 00
          0x30: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

What else is in the box?

-- 

Mark Drayton
izR Solutions Ltd
Tel: +44 08707 447799