[nsp] 3640 hardware/software problem

[Jared Mauch]

On Fri, Nov 01, 2002 at 05:30:05PM -0500, rain wrote:
> I'm having problems getting  NM-2FE2W to come up. I painfully used rommon 
> to load up IOS 12.2T from console still no dice.

	Which 12.2T?

	It actually looks to me like the module may not be seated
properly.  I assume you have tried that also.

	- jared

> http://www.cisco.com/en/US/products/hw/modules/ps2797/products_tech_note0918 
> 6a00800b1155.shtml 
> Someone told me to try a revision ending in E which I tried 12.2(6e) that 
> didn't work either. 
> 
> Anyone have any ideas? 
> 
> Router#sho diag
> Slot 0:
>       Unknown (type 0) Port adapter
>       Port adapter is disabled
>       Port adapter insertion time unknown
>       EEPROM contents at hardware discovery:
>       Hardware revision 0.0           Board revision UNKNOWN
>       Serial number     0             Part number    00-0000-00
>       Test history      0x0           RMA number     00-00-00
>       EEPROM format version 0
>       EEPROM contents (hex):
>         0x20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>         0x30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
> _______________________________________________
> cisco-nsp mailing list  real_name)s@puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/

-- 
Jared Mauch  | pgp key available via finger from jared@puck.nether.net
clue++;      | http://puck.nether.net/~jared/  My statements are only mine.