[nsp] 7600 and ACLs

[Rubens Kuhl Jr.]

Logged packets are passed to the MSFC which then process like a usual IOS
router... it seems ACLs aren't being correctly implanted on the Supervisor.

Relevant config files and some error messages might help us help you...

Rubens


----- Original Message -----
From: "Ash Garg" <ash@telstra.net>
To: <cisco-nsp@puck.nether.net>
Sent: Tuesday, November 05, 2002 8:22 PM
Subject: [nsp] 7600 and ACLs


| Has anyone had problems with acls applied to vlan interfaces on a 7600
| running Native IOS? We have tried two different IOSs: 12.1(8b)e9 &
| 12.1(11b)e7 with little difference.
|
| The problem we notice is that TCP SYN packets aren't passed thru without
the
| use of the "log" key word. When you put in the log keyword, the packets
pass
| thru the interface without a problem...
|
| Ash
|
|
|
|                                            \\\|||///
|                                           \\  ^ ^  //
|                                            (  6 6  )
| -----------------------------------------oOOo-(_)-oOOo---
| Ash Garg                             5/490 Northbourne Ave
| Network Specialist                   DICKSON 2602
| Internet Network Development
| Telstra
|
| Email: <<mailto:Ash.Garg@telstra.net>>
| BH:  +612 6208 1994
| Mob: 0408 687 642
| Fax: +612 6248 6165
|
| The best way to publicize a governmental or political
| action is to attempt to hide it. -Mark B. Cohen
| ----------------------------------------------------------
|
| _______________________________________________
| cisco-nsp mailing list  real_name)s@puck.nether.net
| http://puck.nether.net/mailman/listinfo/cisco-nsp
| archive at http://puck.nether.net/pipermail/cisco-nsp/