[nsp] At last, T3/E3 module for 26xx/36xx

[Scott.Keoseyan@BroadWing.com]

Anything on performance data yet for this?  Anyone have one of these?

Should outperform the native DS/3 ATM interface I would think...

-sak




> -----Original Message-----
> From: Thomas Kernen [mailto:tkernen@deckpoint.ch]
> Sent: Friday, November 22, 2002 2:18 AM
> To: cisco-nsp@puck.nether.net
> Subject: [nsp] At last, T3/E3 module for 26xx/36xx
> 
> 
> 
> Since this has been a recurring question on the list over the 
> year (ie:
> what's the best way to connect a 26xx/36xx to a T3/E3 circuit) well I
> thought I would drop a quick line since I discovered that 
> Cisco are now
> producing a T3/E3 Network Module for the 26xx/36xx series: NM-1T3/E3
> 
> Please note that is does require one of the newer 26xx/36xx:
> Cisco 2650 and 51XM
> Cisco 2691
> Cisco 3660
> Cisco 3725
> Cisco 3745
> 
> Thomas
> 
> _______________________________________________
> cisco-nsp mailing list  real_name)s@puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
> 
 +++The information transmitted is intended only for the person or entity to
which it is addressed and may contain confidential and/or privileged
material.  Any review, retransmission, dissemination or other use of, or
taking of any action in reliance upon, this information by persons or
entities other than the intended recipient is prohibited.   If you received
this in error, please contact the sender and destroy any copies of this
document.+++