[nsp] dot1q causes port error?

[Gert Doering]

Hi,

On Tue, Nov 26, 2002 at 01:07:26PM +0000, Stephen J. Wilcox wrote:
> So as my hardware also requires minimum 12.1(8)EC that means I can only use
> 12.2(12) and higher... hrmmmm. 

12.2(12a) has been fairly well-behaved for me.  

(Mostly, that is - if you remove a "bridge-group 1" statement from an
FastE-Interface that is currently active briding, the router locks up
hard.  So "don't do this, then".  No bug ID, sorry - TAC wants money to
listen to bug reports)

> All I am doing is running a fast ethernet on a 7200/225 with dot1q. You'd have
> thought IOS choice would be simpler!

What kind of hardware is it that you need 12.1(8)EC for?  The basic 7200
and NPE-225 should work fine with 12.0(21)S5, which is what I'd recommend.

gert
-- 
USENET is *not* the non-clickable part of WWW!
                                                           //www.muc.de/~gert/
Gert Doering - Munich, Germany                             gert@greenie.muc.de
fax: +49-89-35655025                        gert.doering@physik.tu-muenchen.de