[nsp] dot1q causes port error?

[Stephen J. Wilcox]

Ok,
 I think I have this bug!

CSCdw50638 - Incrementing underruns on Fast Ether -
DEC21140-3-UNDERFLO. Affecting 12.1(11) to  12.2(9.2)

So.. back to my which IOS now thread..

Well lets see .. we have the bug above, we have
CSCdx68871 - 7200 with dot1q may align and reload - 12.2(5)-12.2(11.3) 

and

CSCcv86717 - FE i82543 may become wedged. 12.1(1)- 12.2(7)

So seems that rules out anything from 12.1(1) from 12.2(11). Nice!

So as my hardware also requires minimum 12.1(8)EC that means I can only use
12.2(12) and higher... hrmmmm. 

All I am doing is running a fast ethernet on a 7200/225 with dot1q. You'd have
thought IOS choice would be simpler!

Steve

-- 
Stephen J. Wilcox
BSc (Hons).  CCIE #10730
Technical Director, Telecomplete
http://www.telecomplete.co.uk/

On Tue, 26 Nov 2002, Stephen J. Wilcox wrote:

> MPLS isnt enabled on this .. I have seen similar tho where MPLS is enabled
> however on the switches where I saw it the giant counter increased only, not
> crc's etc 
> 
> Steve
> 
> 
>