[nsp] dot1q causes port error?

[Stephen J. Wilcox]

Indeed, I have had a think tho and it may have actually been the boot loader
which was the issue being 12.0(3) or something.. ignore that then.


On Tue, 26 Nov 2002, Lars Fenneberg wrote:

> Quoting Stephen J. Wilcox (steve@telecomplete.co.uk):
> 
> > NPE-225 w 256Mb requires 12.1(8)EC or later .. I have proved this as the router
> > fails to boot with lower releases reporting dimm error.
> 
> 	That is strange:
> 
> router#show ver
> Cisco Internetwork Operating System Software 
> IOS (tm) 7200 Software (C7200-K4P-M), Version 12.0(21)S1, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
> 
> cisco 7206 (NPE225) processor with 245760K/16384K bytes of memory.
> R527x CPU at 262Mhz, Implementation 40, Rev 10.0, 2048KB L2 Cache
> 6 slot midplane, Version 1.3
> 
> 	Has been running fine for 37 weeks.
> 
> Cheers,
> Lars.
>