[nsp] dot1q causes port error?

[Stephen J. Wilcox]

On Tue, 26 Nov 2002, Gert Doering wrote:

> 12.2(12a) has been fairly well-behaved for me.  

Ugh, wish I'd not tried it now, looks to have all the issues of other 12.2
strains...


Still I'm becoming used to aligns and bus errors, I'd probably think there was
something wrong if I did see them occasiionaly!

Nov 27 04:47:54: %ALIGN-3-SPURIOUS: Spurious memory access made at 0x601000C8
reading 0xC
Nov 27 04:47:54: %ALIGN-3-TRACE: -Traceback= 601000C8 60104A94 00000000 00000000
00000000 00000000 00000000 00000000
Nov 27 04:47:54: %ALIGN-3-TRACE: -Traceback= 601000CC 60104A94 00000000 00000000
00000000 00000000 00000000 00000000
Nov 27 07:06:57: %ALIGN-3-SPURIOUS: Spurious memory access made at 0x601000C8
reading 0xC
Nov 27 07:06:57: %ALIGN-3-TRACE: -Traceback= 601000C8 60104A94 606A01E4 00000000
00000000 00000000 00000000 00000000
Nov 27 07:06:57: %ALIGN-3-TRACE: -Traceback= 601000CC 60104A94 606A01E4 00000000
00000000 00000000 00000000 00000000


> (Mostly, that is - if you remove a "bridge-group 1" statement from an
> FastE-Interface that is currently active briding, the router locks up
> hard.  So "don't do this, then".  No bug ID, sorry - TAC wants money to
> listen to bug reports)
> 
> > All I am doing is running a fast ethernet on a 7200/225 with dot1q. You'd have
> > thought IOS choice would be simpler!
> 
> What kind of hardware is it that you need 12.1(8)EC for?  The basic 7200
> and NPE-225 should work fine with 12.0(21)S5, which is what I'd recommend.
> 
> gert
>