[nsp] ISDN & DOV problems

[Stavros Patiniotis]

Hello,

I am having some trouble comfiguring a router to dialin to our NAS using
ISDN AND DOV. I use resource pooling on the access server.

>From the calling router I get:

*Mar  1 13:33:47.232: %LINK-3-UPDOWN: Interface BRI0:1, changed state to up
*Mar  1 13:33:47.268: BR0:1 PPP: Treating connection as a callout
*Mar  1 13:33:47.268: BR0:1 PPP: Phase is ESTABLISHING, Active Open
*Mar  1 13:33:47.272: BR0:1 PPP: No remote authentication for call-out
*Mar  1 13:33:47.276: BR0:1 LCP: O CONFREQ [Closed] id 69 len 10
*Mar  1 13:33:47.280: BR0:1 LCP:    MagicNumber 0x613DBB16 (0x0506613DBB16)
*Mar  1 13:33:47.296: BR0:1 PPP: I pkt type 0xC021, datagramsize 14
*Mar  1 13:33:47.300: BR0:1 PPP: I pkt type 0xC021, datagramsize 14
*Mar  1 13:33:47.315: BR0:1 LCP: I CONFREQ [REQsent] id 13 len 10
*Mar  1 13:33:47.319: BR0:1 LCP:    MagicNumber 0x4F826CB9 (0x05064F826CB9)
*Mar  1 13:33:47.323: BR0:1 LCP: O CONFACK [REQsent] id 13 len 10
*Mar  1 13:33:47.327: BR0:1 LCP:    MagicNumber 0x4F826CB9 (0x05064F826CB9)
*Mar  1 13:33:47.331: BR0:1 LCP: I CONFACK [ACKsent] id 69 len 10
*Mar  1 13:33:47.335: BR0:1 LCP:    MagicNumber 0x613DBB16 (0x0506613DBB16)
*Mar  1 13:33:47.335: BR0:1 LCP: State is Open
*Mar  1 13:33:47.339: BR0:1 PPP: Phase is UP
*Mar  1 13:33:47.343: BR0:1 PPP: I pkt type 0xC021, datagramsize 8
*Mar  1 13:33:47.347: BR0:1 IPCP: O CONFREQ [Closed] id 69 len 10
*Mar  1 13:33:47.351: BR0:1 IPCP:    Address 0.0.0.0 (0x030600000000)
*Mar  1 13:33:47.355: BR0:1 LCP: I TERMREQ [Open] id 14 len 4
*Mar  1 13:33:47.359: BR0:1 LCP: O TERMACK [Open] id 14 len 4
*Mar  1 13:33:47.359: BR0:1 IPCP: State is Closed
*Mar  1 13:33:47.363: BR0:1 PPP: Phase is TERMINATING
*Mar  1 13:33:49.244: %ISDN-6-DISCONNECT: Interface BRI0:1  disconnected
from XXXXXXXX , call lasted 2 seconds
*Mar  1 13:33:49.248: %LINK-3-UPDOWN: Interface BRI0:1, changed state to
down
*Mar  1 13:33:49.276: BR0:1 LCP: State is Closed
*Mar  1 13:33:49.280: BR0:1 PPP: Phase is DOWN
*Mar  1 13:34:04.346: %ISDN-6-LAYER2DOWN: Layer 2 for Interface BR0, TEI 88
changed to down


Can anyone offer any suggestions, pointing me in the right direction.

Cheers!