[nsp] ISDN & DOV problems

Stavros Patiniotis stavros@staff.esc.net.au
Fri, 4 Oct 2002 17:53:32 +0930


Hi, I have discovered that I had missed some configuration in the serial0:15
interface, and hence, not doing any auth on the call, however now that I
have added that config, I'm getting another strang problem.

The radius server is authentication the user, and recording in its debug
that the user login is ok, however the NAS rejects the login (AUTH-NAK).  I
do not know why this is and what else to debug to try and get more
information. (Aysnc auth works fine...)


*Mar  2 16:46:58.602: BR0:2 LCP: I CONFREQ [REQsent] id 23 len 25
*Mar  2 16:46:58.606: BR0:2 LCP:    AuthProto PAP (0x0304C023)
*Mar  2 16:46:58.606: BR0:2 LCP:    MagicNumber 0x5559DD17 (0x05065559DD17)
*Mar  2 16:46:58.610: BR0:2 LCP:    MRRU 1524 (0x110405F4)
*Mar  2 16:46:58.614: BR0:2 LCP:    EndpointDisc 1 Local (0x13070161636330)
*Mar  2 16:46:58.622: BR0:2 LCP: O CONFREJ [REQsent] id 23 len 8
*Mar  2 16:46:58.622: BR0:2 LCP:    MRRU 1524 (0x110405F4)
*Mar  2 16:46:58.626: BR0:2 LCP: I CONFACK [REQsent] id 15 len 10
*Mar  2 16:46:58.630: BR0:2 LCP:    MagicNumber 0x6721050A (0x05066721050A)
*Mar  2 16:46:58.641: BR0:2 PPP: I pkt type 0xC021, datagramsize 25
*Mar  2 16:46:58.645: BR0:2 LCP: I CONFREQ [ACKrcvd] id 24 len 21
*Mar  2 16:46:58.645: BR0:2 LCP:    AuthProto PAP (0x0304C023)
*Mar  2 16:46:58.649: BR0:2 LCP:    MagicNumber 0x5559DD17 (0x05065559DD17)
*Mar  2 16:46:58.653: BR0:2 LCP:    EndpointDisc 1 Local (0x13070161636330)
*Mar  2 16:46:58.661: BR0:2 LCP: O CONFACK [ACKrcvd] id 24 len 21
*Mar  2 16:46:58.661: BR0:2 LCP:    AuthProto PAP (0x0304C023)
*Mar  2 16:46:58.665: BR0:2 LCP:    MagicNumber 0x5559DD17 (0x05065559DD17)
*Mar  2 16:46:58.669: BR0:2 LCP:    EndpointDisc 1 Local (0x13070161636330)
*Mar  2 16:46:58.673: BR0:2 LCP: State is Open
*Mar  2 16:46:58.673: BR0:2 PPP: Phase is AUTHENTICATING, by the peer
*Mar  2 16:46:58.681: BR0:2 PAP: O AUTH-REQ id 4 len 16 from "esc"
*Mar  2 16:46:58.899: BR0:2 PPP: I pkt type 0xC023, datagramsize 29
*Mar  2 16:46:58.903: BR0:2 PPP: I pkt type 0xC021, datagramsize 8
*Mar  2 16:46:58.907: BR0:2 PAP: I AUTH-NAK id 4 len 25 msg is
"Authorization failed"
*Mar  2 16:46:58.915: BR0:2 LCP: I TERMREQ [Open] id 25 len 4
*Mar  2 16:46:58.915: BR0:2 LCP: O TERMACK [Open] id 25 len 4
*Mar  2 16:46:58.919: BR0:2 PPP: Phase is TERMINATING
*Mar  2 16:47:00.125: %ISDN-6-DISCONNECT: Interface BRI0:2  disconnected
from 82180088 acc0, call lasted 1 seconds
*Mar  2 16:47:00.129: %LINK-3-UPDOWN: Interface BRI0:2, changed state to
down.
*Mar  2 16:47:00.157: BR0:2 LCP: State is Closed
*Mar  2 16:47:00.161: BR0:2 PPP: Phase is DOWN

Any pointers appreciated.


Cheers

Stavros.