[nsp] Router startup

[sthaug@nethelp.no]

> I recently had to do a password recovery of my Cisco 2600 router, and I
> think I may have messed something up:
> 
> I setup the config, then 'wr mem' and then do
> 'copy running-config startup-config'
> 
> t1 works
> 
> But; if I power cycle the router, the config is nuked. t1 doesn't work :)
> 
> Apparently the 2600 is not using 'startup-config' when it boots.

config-reg 0x2102

should do the trick.

Steinar Haug, Nethelp consulting, sthaug@nethelp.no