[nsp] 5300 Qwestion

[Josh Duffek]

going to have to configure Resource Pool Management(RPM) to only allow
incoming calls on the first 5 modems.  How are you inititating the outgoing
call on the last modem?

joshd.

----- Original Message -----
From: "Steve Shultz" <shultz@arc.nasa.gov>
To: <cisco-nsp@puck.nether.net>
Sent: Saturday, October 19, 2002 3:56 AM
Subject: [nsp] 5300 Qwestion


>
> I have a 5300 with a PRI and 6 port mica modems.
>
> I would like to use 5 modems for dialin and one
>
> modem for dialout at 9600 Baud. I have IOS
>
> (C5300-IK9S-M), Version 12.2(10)
>
> I have configured:
>
> interface Async6
>   description Modem Dialout Pool
>   ip unnumbered Loopback1
>   async mode dedicated
> line 6
>   location oob Dialout
>   flush-at-activation
>   modem InOut
>   modem dialout controller t1 0
>   terminal-type vt100
>   no exec
>   transport preferred none
>   transport input telnet ssh
>   transport output telnet ssh
>   autohangup
>
> _______________________________________________
> cisco-nsp mailing list  real_name)s@puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>