[nsp] 5300 Qwestion

[Steve Shultz]

Josh,
         I plan to use the 6th modem for Out of Band access to other Cisco
equipment that has USR Sportsters modems on either their console or
modem port. I would just Reverse Telnet to the 5300 using port 2006.
Telnet 198.10.xx.xx 2001. I can do this now but can't force the 5300
to use 9600 baud.


At 02:57 PM 10/20/2002 -0500, Josh Duffek wrote:
>going to have to configure Resource Pool Management(RPM) to only allow
>incoming calls on the first 5 modems.  How are you inititating the outgoing
>call on the last modem?
>
>joshd.
>
>----- Original Message -----
>From: "Steve Shultz" <shultz@arc.nasa.gov>
>To: <cisco-nsp@puck.nether.net>
>Sent: Saturday, October 19, 2002 3:56 AM
>Subject: [nsp] 5300 Qwestion
>
>
> >
> > I have a 5300 with a PRI and 6 port mica modems.
> >
> > I would like to use 5 modems for dialin and one
> >
> > modem for dialout at 9600 Baud. I have IOS
> >
> > (C5300-IK9S-M), Version 12.2(10)
> >
> > I have configured:
> >
> > interface Async6
> >   description Modem Dialout Pool
> >   ip unnumbered Loopback1
> >   async mode dedicated
> > line 6
> >   location oob Dialout
> >   flush-at-activation
> >   modem InOut
> >   modem dialout controller t1 0
> >   terminal-type vt100
> >   no exec
> >   transport preferred none
> >   transport input telnet ssh
> >   transport output telnet ssh
> >   autohangup
> >
> > _______________________________________________
> > cisco-nsp mailing list  real_name)s@puck.nether.net
> > http://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
> >