[nsp] 5300 Qwestion

[Josh Duffek]

ok cool.  you dont need the async interface configured then...but it wont
hurt.

try ats30=9600

http://www.cisco.com/univercd/cc/td/doc/product/access/acs_serv/5300/sw_conf
/sw_ports/at_set/piafsat.htm

joshd.


----- Original Message -----
From: "Steve Shultz" <shultz@arc.nasa.gov>
To: "Josh Duffek" <jduffek@cisco.com>; <cisco-nsp@puck.nether.net>
Sent: Sunday, October 20, 2002 4:07 PM
Subject: Re: [nsp] 5300 Qwestion


> Josh,
>          I plan to use the 6th modem for Out of Band access to other Cisco
> equipment that has USR Sportsters modems on either their console or
> modem port. I would just Reverse Telnet to the 5300 using port 2006.
> Telnet 198.10.xx.xx 2001. I can do this now but can't force the 5300
> to use 9600 baud.
>
>
> At 02:57 PM 10/20/2002 -0500, Josh Duffek wrote:
> >going to have to configure Resource Pool Management(RPM) to only allow
> >incoming calls on the first 5 modems.  How are you inititating the
outgoing
> >call on the last modem?
> >
> >joshd.
> >
> >----- Original Message -----
> >From: "Steve Shultz" <shultz@arc.nasa.gov>
> >To: <cisco-nsp@puck.nether.net>
> >Sent: Saturday, October 19, 2002 3:56 AM
> >Subject: [nsp] 5300 Qwestion
> >
> >
> > >
> > > I have a 5300 with a PRI and 6 port mica modems.
> > >
> > > I would like to use 5 modems for dialin and one
> > >
> > > modem for dialout at 9600 Baud. I have IOS
> > >
> > > (C5300-IK9S-M), Version 12.2(10)
> > >
> > > I have configured:
> > >
> > > interface Async6
> > >   description Modem Dialout Pool
> > >   ip unnumbered Loopback1
> > >   async mode dedicated
> > > line 6
> > >   location oob Dialout
> > >   flush-at-activation
> > >   modem InOut
> > >   modem dialout controller t1 0
> > >   terminal-type vt100
> > >   no exec
> > >   transport preferred none
> > >   transport input telnet ssh
> > >   transport output telnet ssh
> > >   autohangup
> > >
> > > _______________________________________________
> > > cisco-nsp mailing list  real_name)s@puck.nether.net
> > > http://puck.nether.net/mailman/listinfo/cisco-nsp
> > > archive at http://puck.nether.net/pipermail/cisco-nsp/
> > >
>
>