[nsp] oam-pvc manage packet loss
Alex Rubenstein
alex@nac.net
Sat, 7 Sep 2002 00:30:59 -0400 (Eastern Daylight Time)
add the following:
On Wed, 4 Sep 2002, Birsen Ozturk wrote:
> Hello
>
> For some purpose I am using "oam-pvc manage" command under the ATM subinterface. I am surprised to see that it causes packet loss. What can be the reason/solution? I will appreciate any idea.
>
> This configuration has 5% packet loss:
> !
> interface ATM8/0/0.205 point-to-point
> ip address x.x.x.x 255.255.255.252
> ip ospf network point-to-point
> pvc 0/205
> oam-pvc manage
> encapsulation aal5snap
ubr 2048 ! or whatever
> !
> When I make it this way the packet loss dissapears:
> !
> interface ATM8/0/0.205 point-to-point
> ip address x.x.x.x 255.255.255.252
> ip ospf network point-to-point
> atm pvc 13 0 205 aal5snap 2048 2048 32
> !
>
> Birsen Ozturk
> e-mail: birsenozturk@turk.net
> (\__/)
> (='.'=)
> (")_(")
> _______________________________________________
> cisco-nsp mailing list real_name)s@puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
-- Alex Rubenstein, AR97, K2AHR, alex@nac.net, latency, Al Reuben --
-- Net Access Corporation, 800-NET-ME-36, http://www.nac.net --