[nsp] NTP server in 800 Series routers

[Victor Sudakov]

Harold Ritter wrote:
> 
> The NTP server functionality is available in the IP feature set.

Does not seem to be:

SibPTUS(config)#n?
netbios  no
SibPTUS(config)#sn?
snmp  snmp-server  sntp
SibPTUS(config)#


The box is running
IOS (tm) C828 Software (C828-SY6-M), Version 12.2(8)T1,  RELEASE SOFTWARE (fc2)

> 
> You can refer to the Feature Navigator on CCO to get what features are 
> available in what feature sets or releases.
> 
> http://www.cisco.com/cgi-bin/Support/FeatureNav/FN.pl

Yes, according to the Feature Navigator it's there, but its information
does not seem to always be 100% accurate.

> >What IOS feature set do I need to have an NTP server (not just SNTP
> >client) in a 800 Series router?
> >
> >If it is not available at all, what technology could I use to
> >broadcast NTP packets to a remote network behind a c805?
> >
> >Thanks a lot in advance.
> >--
> >Victor Sudakov,  VAS4-RIPE, VAS47-RIPN
> >_______________________________________________

-- 
Victor Sudakov,  VAS4-RIPE, VAS47-RIPN