[nsp] Software for Cisco 827-4V?

Pekka Savola pekkas at netcore.fi
Tue Apr 1 19:36:53 EST 2003


Hi,

Which software do you run on Cisco 827-4V's?

I have 12.1(5)YC2 which is leaking memory; after less than a month you 
can't poll SNMP, telnet dies, and even serial console refuses to let you 
in.

I don't really need the voice stuff supported by the 827, just plain 
working code.  It seems, though, that most software would require more 
memory, and the ISP providing the device was stingy..

--8<--
Cisco Internetwork Operating System Software 
IOS (tm) C820 Software (C820-OSV6Y656I-M), Version 12.1(5)YC2, EARLY 
DEPLOYMENT RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Fri 22-Feb-02 23:27 by ealyon
Image text-base: 0x80013170, data-base: 0x80958864

ROM: System Bootstrap, Version 12.1(1r)XB1, RELEASE SOFTWARE (fc1)
ROM: C820 Software (C820-OSV6Y656I-M), Version 12.1(5)YC2, EARLY 
DEPLOYMENT RELEASE SOFTWARE (fc1)

Nalle2 uptime is 2 hours, 13 minutes
System returned to ROM by power-on
System image file is "flash:c820-osv6y656i-mz.121-5.YC2.bin"
[...]

CISCO C827-4V (MPC855T) processor (revision 0x502) with 23552K/1024K bytes 
of memory.
Processor board ID JAD04380OMF (1325093052), with hardware revision 6711
CPU rev number 5
Bridging software.
4 POTS Ports
1 Ethernet/IEEE 802.3 interface(s)
1 ATM network interface(s)
128K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102

-- 
Pekka Savola                 "You each name yourselves king, yet the
Netcore Oy                    kingdom bleeds."
Systems. Networks. Security. -- George R.R. Martin: A Clash of Kings



More information about the cisco-nsp mailing list