[nsp] 12.2.14S issues

[Ezequiel Carson]

At this moment im having the same issue with the CLI in a 7206VXR NPE300

Is there any solution for this?

Thanks
Ezequiel.

On Wed, 2003-03-26 at 16:52, jlewis at lewis.org wrote:
> I'm running this version now on a 7513 and a pair of 7206's and have run
> into a couple of issues.
> 
> 1) policy routing (setting the output interface based on an IP extended
> access-list in a route-map) doesn't appear to work on the 7513.  Traffic
> still goes out via whichever interface is appropriate based on the routing
> table (this router has full BGP routes).  I'm trying to force packets from 
> 2 source addresses out via a particular transit provider.
> 
> 2) on the 7206's, the CLI is unstable and seems to lock up when large
> amounts of data are entered or displayed...especially if I try to paste a
> line or several lines into the config (conf t).  When this happens, I have
> to kill my telnet and reconnect to the router.  I'm seeing this on 2 
> 7206's (one's a VXR NPE300, one's a non-VXR NPE200) in two different POPs.
> 
> Images I'm using are:
> rsp-pv-mz.122-14.S.bin
> c7200-p-mz.122-14.S.bin 
> 
> Has anyone else noticed these problems?
> 
> ----------------------------------------------------------------------
>  Jon Lewis *jlewis at lewis.org*|  I route
>  System Administrator        |  therefore you are
>  Atlantic Net                |  
> _________ http://www.lewis.org/~jlewis/pgp for PGP public key_________
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>