[nsp] Serial number

[John Tobias]

I tried "sh idprom backplane" on my two 6500s (6.4.5 and 7.3.1) and got
"unrecognized command". Anyone know why that is?

John Tobias

-----Original Message-----
From: sthaug at nethelp.no [mailto:sthaug at nethelp.no] 
Sent: Thursday, April 17, 2003 12:27 AM
To: jared at puck.nether.net
Cc: cisco-nsp at puck.nether.net
Subject: Re: [nsp] Serial number

> 	For the 6500:
> 
> 	sh idprom backplane
> 
> 	It would be nice if cisco could standardize this across all
> their ios based platforms..

Lots of other opportunities for standardization too. My current pet
peeve is the flash memory on the secondary (redundant) processor - 
sec-slot0: on the GSR and slaveslot0: on 6500/native.

Steinar Haug, Nethelp consulting, sthaug at nethelp.no
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/