[nsp] PA-MC-2T3+ reporting traffic way too high

[George Stylianou]

Sorry, I forgot to mention that T3 card is the following

PA-2T3

We are also seeing this on PA-8T-X21

This is only occuring on a 7500, our 7200's look fine...

George



> -----Original Message-----
> From: Gert Doering [mailto:gert at greenie.muc.de] 
> Sent: 04 August 2003 09:18
> To: George Stylianou
> Cc: Jared Mauch; Jeff Chan; cisco-nsp at puck.nether.net
> Subject: Re: [nsp] PA-MC-2T3+ reporting traffic way too high
> 
> 
> Hi,
> 
> On Mon, Aug 04, 2003 at 08:06:15AM +0200, George Stylianou wrote:
> > No outbound stats for T3 interfaces on 7576 running 12.2(14)S3
> > 
> >   30 second input rate 41177000 bits/sec, 9524 packets/sec
> >   30 second output rate 0 bits/sec, 0 packets/sec
> > 
> > And the other end of the circuit reports this...
> > 
> >  30 second input rate 34736000 bits/sec, 16647 packets/sec
> >  30 second output rate 0 bits/sec, 0 packets/sec
> 
> Actually that's a new one for me.  Usually the *output* 
> counters are broken, but input work fine.  Kudos to Cisco for 
> a creative bug.
> 
> (Of course it's a shame that things like this aren't fixed 
> immediately - broken counters are costing ISPs *real money*)
> 
> gert
> -- 
> USENET is *not* the non-clickable part of WWW!
>                                                            
> //www.muc.de/~gert/
> Gert Doering - Munich, Germany                             
> gert at greenie.muc.de
> fax: +49-89-35655025                        
> gert at net.informatik.tu-muenchen.de
> 


This email and its content are subject to the disclaimer as displayed at the following link.
http://www.is.co.za/disc.asp
Should you not have Web access, send a mail to disclaimers at is.co.za