[nsp] PA-MC-2T3+ reporting traffic way too high

Gert Doering gert at greenie.muc.de
Mon Aug 4 15:50:58 EDT 2003


Hi,

On Mon, Aug 04, 2003 at 01:31:37PM +0200, George Stylianou wrote:
> Sorry, I forgot to mention that T3 card is the following
> 
> PA-2T3

Ah.  In that case, it's probably just the usual "output counters get
stuck" bug - 34 / 41 Mbit/s. are a decent value for input bps.  Try 
issueing a "clear counter <interface>", that should get the counters
going again.

I was confusing this with the PA-MC-T3 problems, where you get bps rates
over 10 mbit/s. on a T1 (1.5 mbit/s.).

gert
-- 
USENET is *not* the non-clickable part of WWW!
                                                           //www.muc.de/~gert/
Gert Doering - Munich, Germany                             gert at greenie.muc.de
fax: +49-89-35655025                        gert at net.informatik.tu-muenchen.de


More information about the cisco-nsp mailing list