[nsp] testing WIC1-DSU-T1 w/ Kentrox DSU

Eric L. Howard elh at outreachnetworks.com
Fri Aug 8 15:31:10 EDT 2003


At a certain time, now past [Aug.08.2003-02:00:51PM -0400], streiner at stargate.net spake thusly:
> On Fri, 8 Aug 2003, Eric L. Howard wrote:
> 
> > In testing a wic1-dsu back to back w/ a Kentrox - any special cable pin-out
> > needed?
> 
> You'll probably need to make a crossover cable.  I believe the pinouts
> are:
> 
> 1 ------------------ 4
> 2 ------------------ 5

I've got a loopback plug with that pinout - works when I plug into the
Kentrox - works when I plut it into the wic1-dsu.  Doesn't work when I link
the two back-to-back.

I set clock source to internal on the wic, but no dice.
       
       ~elh

-- 
Eric L. Howard           e l h @ o u t r e a c h n e t w o r k s . c o m
------------------------------------------------------------------------
www.OutreachNetworks.com                                    313.297.9900
------------------------------------------------------------------------
JabberID: elh at jabber.org                 Advocate of the Theocratic Rule


More information about the cisco-nsp mailing list