[nsp] Netflow on E3 LC

[Yuval Ben-Ari]

you need to globally enable flow-sampling with "ip flow-sampling-mode
packet-interval X"
you can verify with "show ip flow sampling"
I know it is explained somewhere on the CCO

> -----Original Message-----
> From: Majid Siddiq [mailto:majid at pie.net.pk] 
> Sent: Tuesday, August 12, 2003 8:59 AM
> To: cisco-nsp at puck.nether.net
> Subject: [nsp] Netflow on E3 LC
> 
> 
> Hi,
> 
> I am unable to get any data when I enabled netflow on POS 
> interfaces of ISE
> card on 12410. IOS is 12.0.25S1.
> 
> Same result with 'sampled' option and 'direction'.
> 
> Any clue of what's going on ?  i have not searched the bug 
> toolkit and have
> not found any relevant bug.
> 
> IP packet size distribution (0 total packets):
>    1-32   64   96  128  160  192  224  256  288  320  352  
> 384  416  448
> 480
>    .000 .000 .000 .000 .000 .000 .000 .000 .000 .000 .000 
> .000 .000 .000
> .000
> 
>     512  544  576 1024 1536 2048 2560 3072 3584 4096 4608
>    .000 .000 .000 .000 .000 .000 .000 .000 .000 .000 .000
> 
> IP Flow Switching Cache, 69636 bytes
>   0 active, 1024 inactive, 0 added
>   0 ager polls, 0 flow alloc failures
>   Active flows timeout in 30 minutes
>   Inactive flows timeout in 15 seconds
>   last clearing of statistics 17:51:39
> Protocol         Total    Flows   Packets Bytes  Packets Active(Sec)
> Idle(Sec)
> --------         Flows     /Sec     /Flow  /Pkt     /Sec     
> /Flow     /Flow
> 
> Actual flows can be seen on line cards only
>         Do "attach <slot>" and re-enter the show command
> 
> regards
> majid
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>  
>