[nsp] Uploading Cisco Configuration via SNMP

[Jason Lixfeld]

Not sure if this will help your cause but it has it's uses, that's for 
sure.

http://www.panchoproject.org

On Tuesday, August 19, 2003, at 2:08 AM, Engin ZEREN wrote:

> Dear all,
> The network contains several Cisco805 routers and they dial 
> access-server many times a day.
> Since the network consists of several routers and I have to update a 
> few parameters on the router configuration, I am looking for a program 
> or snmp
> tool that will   authomatically loads  configuration  paramaters to 
> the routers, which connect to the access-server after a successful 
> authentication.
> I know SolarWinds  upload-config tool named Cisco Uploader can load 
> configuration  manually.
> Is there a way to make such as  this tools possible to automatically 
> load  a new configuration parameters automatically to the routers 
> connected via dialup
> connection ? Does CiscoWorks Resource Manager support such a tool?
>
> Best regards
>
> Engin
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/